The all new 1050 x 1050 corner drawer units!!!

Just thought I'd let you all know that we have launched our new 1050 x 1050 corner drawer units, This gives you a very spacious 650mm wide (internal measurement) drawer as opposed to some other companies 400mm wide drawers. These drawers are extremely useful as they bring the entire corner to you thus wasting the bare minimum of space. the drawers themselves are set out in a pan drawer configuration ( 140mm top and two 283mm high lower drawers) allowing you to store utensils and spices etc in the top drawer and eveything from pot's and pan's to food processors in the lower drawers or with the use of Blum's seperators any combination of items may be stored including plates! as soon as I can I will add some pictures of the drawer pack that we have on show in our stoke on trent showroom, Jason.

Springmill Kitchens Genuine 20% Sale Offer

Receive a massive 20% discount off any full kitchen order from our kitchen collection range.

Simply send the contents of your basket to us using the "Make Enquiry" button. Please ensure the "Include basket contents in email?" is checked. When we've reviewed your order we'll send you a coupon code for a massive 20% off the value of your full kitchen order.

To qualify your order must consist of at least 5 units of any wall or base unit combination and a worktop of your choice.

High quality modern and contemporary kitchens at an amazing price

The coupon code is simply entered by viewing your basket and pressing recalculate.

Click here for details.

New website launched!

We are proud to announce the launch of Spring Mill Kitchens Direct. After months of hard work, blood ,sweat, and some tears, we think our new website offers new and existing customers the best kitchen products available, and at a fantastic price. We also hope it offers a user friendly and informative experience that lets you chose the kitchen of your dreams in a matter of minutes. Please visit www.springmillkitchens.co.uk and let us know what you think. We’d be happy to hear your views.

We’d like to thank our suppliers for their co-operation and help during the LONG process of putting the site together.

On a technical side we’d like to big up the folks at CactusShop, for both their excellent shopping cart system and support. And also jondesign for his great (flash free) slideshow system we have utilised on several pages of the site.

Our choice of payment gateways was a difficult one. Eventually we decided to go with the Protx payment gateway. The largest independent Payment Service Provider in the country. This means that we don’t store any of your credit card details on our site. They are dealt with by Protx who adhere to the most stringent levels of fraud screening, ensuring that customer's details remain secure throughout the transaction process. That’s not to say our site isn’t secure. Every effort has been made to make the shopping experience as safe as possible.

The team at Protx has bee fantastic, helping us quickly set-up the necessary secure connections. With their costs being so competitive, we are able to pass this saving on to our customers.

We are all very excited about moving forward. Adding new and exciting products as they appear, reacting to customer feedback and sharing our experience and knowledge of beautiful kitchens available today and tomorrow.

Kitchen FAQ

A few facts that hopefully explain some industry jargon and some detail on the kitchens available at Spring Mill Kitchens Direct.

What are your doors made of?

There are three types of doors in our collection.

Timber: Real wood door.

Continuous pressure laminate: An MDF board covered with laquered compressed paper.

Vinyl Wrap: An MDF board covered with a PBC vinyl.

What is the carcasing made of?

Cabinets are constructed from 18mm HD (High Density) melamine faced chipboard.

What is Blumotion soft close action?

All our hinges and drawers are manufactured by Blum. When you close either a door or drawer a 'Soft Close' mechanism closes the door/drawer quietly for you. You will never have to hear a door or drawer slam shut again!

What does 'High Line' & 'Drawer Line' mean?

High-line refers to a full hight door. Drawer-line refers to a door that has space for a drawer to go above it.

What is 'Cornice' & 'Light Pelmet'?

Cornice and light pelmet are the finishing arcatrave that goes above and below your wall units, respectively.

Hints and tips for ordering a kitchen

One of our expert fitters has thought of a few fool proof ways to help order the correct amount of components, and give advice on beginning the installation of your kitchen, if you are fitting it yourself.

Marking up

Marking up correctly is vital to installing your kitchen, we have developed a list of measurements to clarify at what height items should be fitted.

From the floor measure 860mm, this point will be the top of your base units.

From the top of the base units, measure to 900mm, this point will be the top of your work surfaces.

From the top of the work surfaces, measure to 1400mm, this point is the bottom of the wall units.

From the bottom of the wall units, measure to 2070mm, this is the point where the hanging brackets will sit for each wall unit.

From the hanging brackets: 2120mm is the measurement of the top of the wall units.

What a fillet pack includes

A fillet pack includes several lengths of carcasing that you will use as spaces and fillets when fitting your kitchen.

A pack includes: 2 x the following sizes; 20mm, 35mm, 50mm, 80mm & 100mm - all are 900mm in height.

We recommend purchasing one fillet pack per kitchen. If any other fillets are required, please do not hesitate in contacting us. Any other lengths you require can be purchased from the website, where a courier charge will be added.

How much to order?

Allowing for mitres on such components as cornice, light pelmet and plinths can be confusing, or forgotten altogether - luckily we have all the information you require to order the correct amounts, first time!

Cornice: When being worked out measure the run of each piece you will need above your wall units, then add an additional 400mm per return at the end of each run. Finally allow 100mm per mitre, as this allows for the mitre waste.

Light Pelmet: When working out the amount of light pelmet you will require, measure each full run underneath your wall units and add 400mm for each return. Finally add an additional 50mm per mitre, as this allows for mitre waste.

Work surfaces: Measure the entire lengths of the runs in your room, (for example an L-shape kitchen has 2 runs, therefore one mitre. A U-shape kitchen has three runs requiring 2 mitres. And a galley kitchen has no mitres at all.) Then add 100mm per mitre to your final calculation, this allows for the mitres and scribing of the work tops.

Plinths: With plinths, leave a gap of approximatly 10mm at the top to enable you to grip it, if it needs to be removed., Scribe them if necessary. If tall units (eg: oven towers, larder units or larder pull outs) are incorporated in your design, order an extra plinth to use as fillets.

Also, as a final tip: We recomend that you order 1 extra handle, in case of any eventualities.